Tags

, , , , , , , , , , , , ,

While traveling between Greenville, OH and Richmond, IN for work, I stopped in an antique store in New Paris, OH and came across this behemoth. The flywheel on this leg vise must have been 18″ in diameter and was very smooth when I turned it.

Some of you may be aware of Jameel Abraham from Benchcrafted who makes reproduction flywheel hardware similar to this for workbench leg vises. I’ve tried one at the Woodworking in America conference a few years ago and loved it.  I even considered buying one for my bench before I built my Roubo workbench a few years ago. This thing would beat up his flywheel and take its lunch money.

The screw mechanism for the flywheel is so big and heavy that it needs its own shelf. I imagine the leg vise can open up to at least 12″.

Even the flywheel on the bottom was no slouch. It was probably about 8″ in diameter. It keeps the leg vise parallel to the leg of the workbench to hold the piece more snug. Put a little grease on these babies and you’ll be ready to go.

The bench sat on casters that could be rolled around the shop. For $1500 it can be all yours. I told the shop keeper that the flywheels were probably worth $500 – $800 just by themselves. What an impressive beast.

Advertisements