I call this piece the “everyday table” because you see this design everyday. I spotted this one at Home Goods just last week. It’s kind of a cross between a table and a bookcase. As far as construction goes, it’s very simple. Six framed legs with a top, a couple of shelves and a cross “X” on each side. In fact, there’s a website that shows how to build this table, pocket screws and all.
Say what you want about the design and construction, but they are very popular and super easy to build. My wife found the website the other week and asked me to customize one to fit in our dining room as a coffee bar.
Being true to form, I built ours out of southern yellow pine (2 x 10’s). I wasn’t a fan of the thick 2 x 4 legs so I milled all the parts down to 1″ thick.
Keeping it simple, I used pocket screws and glue to attach all the pieces. The shelves are southern yellow pine boards I ripped and glued back together to create a quarter sawn panel so they wouldn’t expand and contract too much.
The hardest part about building the piece are the X’s on the sides, but all that entails is cutting a couple of half lap joints.
Here is the finished bar with a vinegar steel wool solution and gel stain on top to give the wood some depth. The coffee bar has turned more into a display table for my wife’s Rae Dunn collection, but that is another story for another day.
I have since played around with the design again and built another one using eastern white pine. Construction is similar except I used floating tenons instead of pocket screws to build the frames. I’ll still use the vinegar and steel wool solution again on this one and stain it a dark color. My third design will probably have a thicker top and I may use plywood for the shelves. Stay tuned.