Whipping Up a Reclaimed Tray

Last week, Anita came home from Home Goods with a tray that she bought for $18.00. I took a look at it and thought to myself ” I coulda made that, but whatever”. Well, after she had it on our dining room table she decided that the sides of the tray were too high and asked me to make her one with shallower sides.

20180603_143612-e1528333925315.jpg

I went into the basement and looked in a box that I filled with wood that came from an old pallet I tore apart. I know using pallet wood is frowned upon in the woodworking world, but it was free and has the character Anita was looking for.

20180603_093417.jpg

The first thing I did was grab a few pieces and planed them down only on one side to make them about 3/8″ thick. I then milled the boards to 3″ wide and glued them together. I used two old panel clamps that I bought last year at an antique show that excel at gluing thin boards together.

IMG_20180603_094127_832.jpg

The bars on each side prevent the boards from buckling up when clamping pressure is applied. I originally bought the clamps to sell them to make some quick cash, but I’m glad I never did. They work great!

IMG_20180603_094127_826.jpg

After the glue dried, I sanded the planed side on my Performax drum sander to make the bottom of the tray perfectly flat.

20180603_113135.jpg

Anita wasn’t thrilled with the gray color of the wood, so I used my Porter Cable Restorer and sanded the gray off the panel perpendicular to the grain. This allowed the wood to get cleaned up yet not lose its character.

IMG_20180603_120625_532.jpg

After the panel was sanded, Anita applied Weathered Oak stain to the pieces. You can see how the stain pops the grain, but still makes it look old.

IMG_20180603_120625_533.jpg

After the stain dried, I glued and nailed the sides to the bottom. The sides are 1 1/2″ wide x 1/2″ thick reclaimed pine.

20180603_143335.jpg

Anita installed some blacksmith made handles to the sides and placed it on our dining room table. A super quick and easy project that was made within just a few hours.

IMG_20180605_193110_851.jpg

Advertisements

4 thoughts on “Whipping Up a Reclaimed Tray

    1. The Hartford Clamp Co patented in 1919. They’re antique and you can’t buy them anymore. I bought mine for $20 a piece and they sell on Ebay for $100. Since I used them, I can’t sell them. It’s the one rule I have about selling antique tools.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s