Springfield Antique Show

Last Friday, my wife and I, went to Brimfield, Massachusetts for their antique show. This Friday we headed to Springfield, Ohio for their Extravaganza. Even though the amount of vendors attending is a third of who sets up at Brimfield (2000 vs 6000), I was hoping to find better deals as I usually don’t do too bad at the Extravaganza.

20170519_091439

There are a lot of professional dealers at Springfield, however the majority of them are concentrated in the center of the fairgrounds. As you venture out onto the outskirts of the show, that is where you’ll find people just setting up tables to sell some of their junk. These are the places where I find the best deals. It’s always nice to visit the tables with a bunch of tools from tool collectors, but that’s not typically where the deals are.

img_20170519_204638_625

On this table were a Stanley BedRock No 604 for $150 and a Stanley No 8 for $100. Not bad prices if you wanted to pay retail, but I’m always looking for a deal.

20170519_113657

Occasionally you’ll find good deals at these tables. Here were a couple of Stanley planes and a Keen Kutter No 5. The two No 5’s were $15 and the Stanley No 4 was only $21. I passed up on these planes as I wasn’t feeling it for some reason. I only had $40 left in my pocket and still wanted to walk around and see what else was available before I spent all my cash, so I walked away.

20170519_113827

I always love checking out old anvils even though I haven’t set up my blacksmith shop yet. The big boy anvil in the front was a mere $1000. Too rich for my blood.

img_20170519_141842_852

After we walked around the fairgrounds for six hours, I came home with a few nice tools. Two Stanley miter boxes, two Stanley No 3’s and two Hartford Clamp Co clamps. The clamps are the most interesting thing I bought as after I researched them, they were primarily used for gluing up thin panels. The bars ride on both sides of the panel so the wood won’t bow while being clamped. I’m going to clean them up and see how well they work.

img_20170519_175909_077

As far as deals, I believe I did better at Springfield than I did at Brimfield even though I spent a little bit more money. Now I need to go back to the bank and get some more cash for the Burlington Antique Show in Kentucky on Sunday.

Advertisements

Brimfield Antique Show

Last weekend, my wife and I drove to Massachusetts to go to the Brimfield Antique Show. We heard about Brimfield for years, but finally decided to take the plunge and drive out there to see it for ourselves. With 6000 dealers attending, we were excited to see the show.

20170512_094352

We drove to Connecticut the night before and woke up Friday morning at 5:00 am to drive up north to the show. We arrived into Brimfield around 7:30 am and the first thing we noticed was that it reminded us of a very large stop on the World’s Longest Yard Sale. Dealer tents were set up on both sides of the street which stretched down for nearly a mile. We came up to a gate where a few people were waiting until 8:00 am for it to open and noticed that there was a $5.00 entry fee to get inside. Given we had a half an hour wait, we walked across the street trying to see if any ther dealers were already open, but only a handful were.

About a half an hour later, we came back to the gate where a large group of people were now waiting. We thought to ourselves that this area must be the place to be, so we handed the attendants $5.00 and waited for the gates to open. As soon as they did, we saw people literally running in like it was a black Friday sale. Anita and I started laughing thinking what in the world could be inside the show area worth running for.

Once we got inside, we looked around to see what all the fuss was all about. There were plenty of dealers selling quality antiques, but they came with dealer prices. After about an hour of buying a few things inside, we went out to see what the other areas had to offer.

20170512_082104

The majority of tools that I saw were being sold by collectors, so there was little opportunity to snag a good deal. I was hoping that since I was on the east coast, I would see a lot of good deals on old Stanley planes, but unfortunately that wasn’t the case.

20170512_081523

I used to think that all the old tools were on the east coast since that is where Stanley plant was located, but I now think tool collectors have all the old tools, not the east coast. It’s just getting harder and harder to find them in the wild for a good price. Most of the planes on this table were $40-85 in price. Even the broken casting block plane was $30.00.

img_20170513_185227_627

It’s impossible to see the whole show in one day, but after spending seven hours all over Brimfield we saw 80-90% of it. Unfortunately, these are all the tools I came home with. An old razee smooth plane, a Stanley No 4, a Ohio Tool Co No 4, a Wards Master No 7,  a Sargent block plane, an egg beater drill, and a turn screw. Not terrible, but I’ve done better. Anita faired better than me as she ran out of money and had to borrow mine. It was still a lot of fun and is definitely worth it, if it is on your bucket list.

20170514_152031